Panasonic Canada Inc._Year 2000 Advisory Bulletin (No.:04)

[Product List for Year 2000 Comformity requirements]

A:Model	B:Category	C:Calendar
A:Model	B:Category	Begin	End
AG-1050	Table	1988	2087
*3:AG-1200	Table	Weekly/Day-Hour-Min.
*3:AG-1210	Table	Weekly/Day-Hour-Min.
AG-1220	Table	1987	2002
AG-1230	Table	1987	2002
AG-1250	Table	1990	2008
AG-1320	Table	1997	2096
AG-1720	Table	1987	2002
AG-1730	Table	1988	2087
*5:AG-1810	Table	1986	1999
AG-1820	Table	1987	2002
AG-1830	Table	1988	2003
*3:AG-1950	Table	Weekly/Day-Hour-Min.
AG-1960	Table	1988	2087
AG-1980	Table	1987	2086
AG-2500	Table	1987	2002
AG-2510	Table	1988	2087
AG-2520	Table	1988	2087
AG-2530	Table	1993	2092
AG-2550	Table	1996	2095
AG-2600E/P	Table	1988	2087
AG-4700E	Table	1988	2087
*2:AG-5260	Table	One Day/Hour-Min.
AG-550	Table	1988	2003
AG-560	Table	1988	2003
AG-5710	Table	1998	2097
AG-V340	Tuner for AG-1900	Weekly/Day-Hour-Min.
AG-W2	Table	1994	2095
NV-V410	Tuner for AG-1900	Weekly/Day-Hour-Min.

A:Model B:Category C:Calendar

Begin End

AG-6760 Time Lapse 1992 2007

AG-RT600 Time Lapse 1992 2007

AG-RT600A Time Lapse 1994 2009

AG-TL300E Time Lapse 1996 2011

AG-TL500P Time Lapse 1996 2011

AG-TL700E Time Lapse 1996 2011

*6:NV-F85(8050) For Time Lapse 00 99

AG-ES10 Floppy Recorder 1988 2007

AJ-DE77 Non-linear Editing 1998 2010

*4:AU-A950 Editing Controller 1990 2099

*4:AU-A960 Editing Controller 1990 2099

A:Model	B:Category	C:Calendar
Begin	End
AG-6760	Time Lapse	1992	2007
AG-RT600	Time Lapse	1992	2007
AG-RT600A	Time Lapse	1994	2009
AG-TL300E	Time Lapse	1996	2011
AG-TL500P	Time Lapse	1996	2011
AG-TL700E	Time Lapse	1996	2011
*6:NV-F85(8050)	For Time Lapse	00	99
AG-ES10	Floppy Recorder	1988	2007
AJ-DE77	Non-linear Editing	1998	2010
*4:AU-A950	Editing Controller	1990	2099
*4:AU-A960	Editing Controller	1990	2099

Note:

1. Models listed in the above are only VTRs and accessories with calendar function.

2. Explanation

A: Model No. --- Only model no. with prefix AG, AJ, AU, NV and VW are listed.

B: Category --- Classified into Camcorder, Table, Time Lapse, Floopy Recorder, Non-Linear, and Editing Controller.

C: Calendar. --- Each model has different length for calendar. Calendar display cycles between above specified years.
Examples -- "Model AG-456UP" "Camcorder" "1990-2089"
-- The calendar indicate from 01/01/1990 to 12/31/2089. Then it will return to 01/01/1990 and repeat.

3. Others

*1: One Time set Only--"Indications (year, month, day) are memorized for at least 5 hours after power is turned off" If the power is off more than 5 hours it erases date on memory, set-up again is required.

*2: Hour-Min.--Displays Hour & Min only. There is no Day, Month, Year.

*3: Weekly/Day-Hour-Min.--Weekly shows Day, Hour & Min. There is no Month and Year.

*4: After upgrading software which will enable to comply with Year 2000 requirements.

*5: AG-160, AG-1810: After 12/31/1999 the calendar will return to 01/01/86.
However, basic function will not be affected such as recording / playing back / FF / REW & others.

*6: Calendar function for models AG-6010, AG-6020, AG-6050 abd NV-F85(8050) can be repeatedly set-up to the correct month-day-year every four years cycle.

1. Models listed in the above are only VTRs and accessories with calendar function.

2. Explanation
A: Model No.	---	Only model no. with prefix AG, AJ, AU, NV and VW are listed.
B: Category	---	Classified into Camcorder, Table, Time Lapse, Floopy Recorder, Non-Linear, and Editing Controller.
C: Calendar.	---	Each model has different length for calendar. Calendar display cycles between above specified years. Examples -- "Model AG-456UP" "Camcorder" "1990-2089" -- The calendar indicate from 01/01/1990 to 12/31/2089. Then it will return to 01/01/1990 and repeat.

3. Others
*1:	One Time set Only--"Indications (year, month, day) are memorized for at least 5 hours after power is turned off" If the power is off more than 5 hours it erases date on memory, set-up again is required.
*2:	Hour-Min.--Displays Hour & Min only. There is no Day, Month, Year.
*3:	Weekly/Day-Hour-Min.--Weekly shows Day, Hour & Min. There is no Month and Year.
*4:	After upgrading software which will enable to comply with Year 2000 requirements.
*5:	AG-160, AG-1810: After 12/31/1999 the calendar will return to 01/01/86. However, basic function will not be affected such as recording / playing back / FF / REW & others.
*6:	Calendar function for models AG-6010, AG-6020, AG-6050 abd NV-F85(8050) can be repeatedly set-up to the correct month-day-year every four years cycle.